RFID credit card reader name:
New Cheap Selling Waterproof R36-2D QR code Access Control RFID Credit Card Reader
Basic parameters:
proyecto |
parámetro |
proyecto |
parámetro |
Tipo de lector de tarjetas |
Tarjeta EM o tarjeta Mifare |
Tipo de código de barras |
QR, código unidimensional/bidimensional |
Método de comunicación |
Wiegand 26/34/RS232/RS485/TTL |
Modo de decodificación |
Decodificación de imágenes |
Dirección de lectura (código de barras) |
Ángulo de 45° con la lente como punto central |
Características del código de escaneo |
Inducción automática, aviso de zumbador |
Voltaje de funcionamiento |
8-12V |
Corriente de trabajo |
800mA |
Distancia de lectura de la tarjeta (tarjeta) |
los 3~6CM |
Velocidad de lectura |
|
Distancia de lectura (código QR) |
0-20cm |
Calidad del material |
Marco de aleación de zinc + panel acrílico |
Humedad de trabajo |
10%~90% |
Temperatura de funcionamiento |
-20 °C ~ 70 °C |
Sistema operativo |
WindowsXP/7/8/10), Linux |
Tamaño |
86 mm×86 mm×18 mm |
Luz indicadora |
Luz de trabajo azul, luz de retroalimentación verde |
Peso |
150G |
Otro |
Luz: Estado de espera: la luz azul siempre está encendida; Estado del código de lectura/escaneo de la tarjeta: la luz verde está encendida durante aproximadamente 0,5 segundos
Bocina incorporada: zumbador |
Line sequence definition:
Wiegand 26/34 |
RS485 |
RS232 |
Línea roja: 12v |
Línea roja: 12v |
Línea roja: 12v |
Alambre negro: GND |
Alambre negro: GND |
Alambre negro: GND |
Línea verde: D0 |
Alambre marrón: 485A |
Línea azul: RX |
Línea blanca: D1 |
Naranja: 485B |
Línea amarilla: TX |
Precautions:
1. The access control reader cannot store user data and information, and cannot add card users, password users, and fingerprint users. It is only an expanded card or password unlocking tool, which needs to rely on access control integrated machines, card time attendance machines, multi-door controllers and other equipment to use.
2. When installing/removing, please turn off the power first and do not operate with power.
3. The maximum reading distance is in a non-interference environment, the card reader is installed in the correct way, and the card is measured parallel to the surface of the card reader, any electromagnetic interference environment will affect the reading distance.
4. Do not install the card reader on the surface of magnetic or metal objects. Magnetic and metal materials will seriously affect the RF signal
5. Do not install the card reader near devices that produce interference electromagnetic fields, such as motors, AC/DC converters, UPS, relays etc.
6. The power supply should ensure sufficient power, try to use a linear power supply, and the door lock and controller should be powered separately. Install the power supply as close as possible to the electrical equipment to avoid interference and transmission loss.
7. It is recommended to pay attention to separate the strong and weak current when wiring, and the separation requirement is greater than 20cm. The power cord should be a multi-stranded wire with a sufficiently thick wire diameter.
Pictures: